Universal Testing House LAB

Curing Tank

Curing Tank or Concrete Curing Tank is used for the curing of concrete samples for at least 8 hours. The purpose of curing is to ensure that all concrete samples are similar with regards to quality and strength. 24 Hour cycle from time of mixing. Controlled 35° C or 100° C ± 2° C Curing Temperature for concrete.

Cement autoclave

Cement Autoclave provides accelerated curing of mortar bar specimens to estimate the expansion of hydraulic cement caused by hydration using the ASTM C151 test method. Test Bars are cured in controlled steam pressure and temperature.

Flow table appratus

A flow table test machine is a device used to determine the flow characteristics of cementitious materials, such as concrete or mortar. It is commonly employed in construction and civil engineering laboratories to assess the workability and consistency of fresh concrete mixtures.

consolidation apparatus

The consolidation apparatus is rigidly constructed to ensure minimum frame distortion. The frame is designed to load the specimen through a lever arm assembly and one of three alternative beam ratios as 9:1, 10:1 and 11:1. The beam is fitted with a counterbalance weight and beam support jack.

point load tester price

This instrument is mainly intended for field measurements on rock specimen but it can also be used in the laboratory. The results of the test may also be used to predict the uniaxial compressive strength of rock from correlations. The apparatus is light and portable.

Thin Film Oven

Thin film deposition is the process of creating and depositing thin film coatings onto a substrate material. These coatings can be made of many different materials, from metals to oxides to compounds.

Muffle Furnace

A muffle furnace or muffle oven (sometimes retort furnace in historical usage) is a furnace in which the subject material is isolated from the fuel and all of the products of combustion, including gases and flying ash.

Strohlein apparatus

The Strohlein apparatus, also known as a carbon and sulfur apparatus, is a laboratory instrument used to determine the carbon and sulfur content in various materials like metals, alloys, and coal. It works by combusting the sample in an oxygen-rich environment and measuring the resulting carbon dioxide (CO₂) and sulfur dioxide (SO₂) to determine the concentrations of the original elements

Digital Spectrophotometer

A digital spectrophotometer is an instrument used to measure the intensity of light absorbed or transmitted by a sample at different wavelengths. It is a highly sensitive and precise instrument that can measure the absorption or transmission spectrum of a substance in a solution.

Pile Integrity testing aapratus_1

A Pile Integrity Tester (PIT) is a non-destructive testing instrument used to assess the structural integrity of concrete piles.

Pile Integrity testing aapratus_2

A Pile Integrity Tester (PIT) is a non-destructive testing instrument used to assess the structural integrity of concrete piles,

Pile Integrity testing aapratus_3